Downloads - Laminators Inc.

Click below to access downloadable product information and installation instructions.

Documents are subject to change and new documents may be added at any point in time. Please be sure to check back for updates prior to starting a new project. Contact us if you have any questions.

Additional resources and videos can be found on our YouTube page.

Omega-Lite® Brochure

Effective Date: July 19, 2024

The Omega-Lite ACM panels and installation systems brochure has everything you need to know regarding technical data, references & testing, approvals & compliances, detailed product & system information, and so much more.

AdaptaClad® RS Brochure

Effective Date: April 8, 2024

AdaptaClad™ RS is an extremely adaptable, easy-to-use rainscreen installation system designed to utilize our NEW Omega-Lite® FR ACM panels.

Field-Fabricated Installations Systems Brochure

Effective Date: May 1, 2019

Laminators’ back-drained and ventilated field-fabricated installation systems provide designers and installers with the optimal solution to meet the challenges associated with achieving a code-compliant exterior wall envelope.

Insulated Glazing Panels Brochure

Effective Date: November 12, 2024

In addition to our standard flat Thermolite™ panel, Laminators offers fabricated options to provide additional R-Value, new aesthetics, and the ability to create hairline joints between panels. Also featured is our new InfernoShield® Non-Combustible Insulated Glazing Panel.

InfernoShield® Non-Combustible Insulated Glazing Panels Flyer

Effective Date: February 1, 2023

Information about our new non-combustible glazing panel.

Architectural Color Chart

Effective Date: September 20, 2024

View colors with finish options. Unlimited custom colors are also available.

Cleaning Recommendations

Effective Date: June 21, 2022

Recommendations on routine care and how to clean ACM panels.

Code-Compliance Conflicts in the Exterior Wall Assembly

Effective Date: 2016

NOTE: You can no longer receive credit for this course. This is for informational purposes only.

CAD Details and Technical Bulletins are to be considered as part of Laminators’ System Guides and are required to install our systems properly.

Additional resources and videos can be found on our YouTube page.

Laminators Approved Materials

Effective Date: February 23, 2022

This document contains information that supplements content in our current system guides.

Laminators Approved Materials (Legacy Version)

Effective Date: Effective February 23, 2022

This document contains information that supplements content in our legacy system guides.

1-Piece, Tight-Fit Molding System Guide

Effective Date: March 18, 2022

The back-drained and ventilated 1-Piece, Tight-Fit Molding installation system offers a traditional yet high-tech appearance at an affordable cost. Aluminum moldings used to encapsulate panel edges are available in both flat and reveal styles, providing two different aesthetic options for installation.

1-Piece, Tight-Fit Molding System Guide (Legacy Version)

Effective Date: November 2014

Clip & Caulk System Guide

Effective Date: Effective October 5, 2020

The back-drained and ventilated Clip & Caulk installation system provides the traditional look of a shop-fabricated wet seal system without the added hassle and cost of panel fabrication.

Clip & Caulk System Guide (Legacy Version)

Effective Date: April 2015

InfernoShield Edge Treatment Instructions

Effective Date: September 26, 2023

Installation videos can also be viewed on our YouTube channel @LaminatorsInc

Omega-Flex System Guide

Effective Date: March 23, 2021

Omega-Flex panels are intended for use on curved substrates with a radius ranging from 17' down to 8'. Panels are installed using Laminators' aluminum moldings.

Rout & Return Installation Guide

Effective Date: Effective October 26, 2016

Prefabricated panels can be panned on-site using standard carpentry tools to give a solid, finished appearance.

TB #1012: ANSI/UL 263 Fire-Resistance Rated Exterior Wall Assemblies

Effective Date: April 1, 2020

The purpose of this Technical Bulletin is to provide information regarding the relationship of fire-resistance ratings (ANSI/UL 263) of exterior wall assemblies to Laminators Inc. ACM panel systems, Omega CI rigid insulation panels, and NFPA 285 compliance.

TB #1011: Building Code Provisions for Omega CI® with Fire-Treated Plywood

Effective Date: August 12, 2019

The purpose of this Technical Bulletin is to provide an understanding of International Building Code (IBC) provisions for the application of Laminators Inc. Metal Composite Material (MCM) Systems with Omega CI® (OCI) Rigid Insulation Panels.

TB #1010 – ACM Applications

Effective Date: June 15, 2023

ACM panel installations continuing over the top of an exterior wall and seamlessly transitioning into a coping/roofing element has become an increasingly popular aesthetic among design professionals. This tech bulletin serves to provide design professionals an understanding of why ACM panel systems shall not be used in coping/roofing applications and presents alternative concepts to achieve a similar aesthetic.

TB #1007 – Fabrication Sealant Change

Effective Date: December 3, 2020

This tech bulletin serves to provide a definitive explanation of where fabrication sealant is to be used as it pertains to our installation systems.

TB #1005 – Testing Requirements for Insulated Panels

Effective Date: December 14, 2015

This tech bulletin serves to inform the design community of the code-required testing associated with insulated panels and the requirements for reporting R-values as a measure of thermal performance per today’s energy codes.

1-Piece, Tight-Fit Molding Technical Data Sheet (BDV)

Effective Date: October 17, 2024

1-Piece, Tight-Fit Molding Technical Data Sheet (Legacy Version)

Effective Date: October 17, 2024

Clip & Caulk™ Technical Data Sheet (BDV)

Effective Date: October 17, 2024

Clip & Caulk™ Technical Data Sheet (Legacy Version)

Effective Date: October 17, 2024

AdaptaClad® RS Technical Data Sheet

Effective Date: October 17, 2024

Rout & Return Technical Data Sheet

Effective Date: October 17, 2024

Omega-Lite® Technical Data Sheet

Effective Date: October 24, 2024

Omega-Lite® FR Technical Data Sheet

Effective Date: October 17, 2024

Omega CI® Technical Data Sheet

Effective Date: October 17, 2024

InfernoShield® Technical Data Sheet

Effective Date: October 17, 2024

Thermolite™ Technical Data Sheet

Effective Date: October 24, 2024

Thermolite™ U-Max Technical Data Sheet

Effective Date: October 24, 2024

Thermolite™ SE Technical Data Sheet

Effective Date: October 24, 2024

Thermolite™ WE Technical Data Sheet

Effective Date: October 24, 2024

Omega Foam-Ply® Technical Data Sheet

Effective Date: October 17, 2024

Glaze-Lite™ Technical Data Sheet

Effective Date: October 17, 2024

Omega-Flex Technical Data Sheet

Effective Date: October 24, 2024

Laminators Incorporated provides Installation/System Guides, CAD Drawings, and an Approved Materials List to be used in the development of shop drawings. Shop drawing details may be generated to meet/adapt to project-specific conditions provided such details remain in conformance with Laminators CAD Drawings. However, shop drawing details that are generated in conflict with Laminators CAD Drawings are not supported and will render any warranty null and void. Please contact Laminators Technical Support for any questions regarding the use of Laminators CAD Drawings.

Insulated Glazing Panel CAD Drawings (Thermolite Series, InfernoShield)

DESCRIPTION	EFFECTIVE	DWG	PDF
Insulated Glazing Panels, Thermolite Series (IGP-TL), InfernoShield (IGP-IS)	November 28, 2023

Omega CI Rigid Insulation Panel CAD Drawings

DESCRIPTION	EFFECTIVE	DWG	PDF
Omega CI, Over Steel Stud Framing with Gypsum Sheathing (OCI-SF-GYP)	August 2, 2024
Omega CI, Over CMU or Concrete (OCI-CMU)	August 2, 2024

1-Piece, Tight-Fit Molding CAD Drawings (BDV)

DESCRIPTION	EFFECTIVE	DWG	PDF
1-Piece, Tight-Fit Molding, BD&V Over Omega CI (1P-BDV-OCI)	March 21, 2023
1-Piece, Tight-Fit Molding, BD&V Over Gypsum Sheathing (1P-BDV-GYP)	March 21, 2023
1-Piece, Tight-Fit Molding, BD&V Over CMU or Concrete (1P-BDV-CMU)	March 21, 2023

1-Piece, Tight-Fit Molding CAD Drawings (Legacy Version)

DESCRIPTION	EFFECTIVE	DWG	PDF
1-Piece, Tight-Fit Molding, Legacy, Over Plywood Sheathing	January 31, 2020
1-Piece, Tight-Fit Molding, Legacy, Over Non-Structural Sheathing	January 31, 2020
1-Piece, Tight-Fit Molding, Legacy, NFPA 285 Compliant	January 31, 2020

Clip & Caulk CAD Drawings (BDV)

DESCRIPTION	EFFECTIVE	DWG	PDF
Clip & Caulk, BD&V Over Omega CI (CC-BDV-OCI)	March 21, 2023
Clip & Caulk, BD&V Over Gypsum Sheathing (CC-BDV-GYP)	March 21, 2023
Clip & Caulk, BD&V Over CMU or Concrete (CC-BDV-CMU)	March 21, 2023

Clip & Caulk CAD Drawings (Legacy Version)

DESCRIPTION	EFFECTIVE	DWG	PDF
Clip & Caulk, Legacy, Over Plywood Sheathing	January 31, 2020
Clip & Caulk, Legacy, Over Non-Structural Sheathing	January 31, 2020
Clip & Caulk, Legacy, NFPA 285 Compliant	January 31, 2020

NEW! AdaptaClad RS CAD Drawings

DESCRIPTION	EFFECTIVE	DWG	PDF
AdaptaClad RS – Architectural Design Details	September 20, 2024

Rout & Return CAD Drawings

DESCRIPTION	EFFECTIVE	DWG	PDF
Rout & Return, Over Plywood or OSB (Structural) Sheathing (RR-PLY)	December 3, 2020
Rout & Return, Over Gypsum (Non-Structural) Sheathing (RR-GYP)	December 3, 2020
Rout & Return, Over Omega CI (RR-OCI)	December 3, 2020
Rout & Return, Over Alternate CI System (with Vertical Rails) (RR-ACI-V)	December 3, 2020
Rout & Return, Over Alternate CI System (with Horizontal Rails) (RR-ACI-H)	January 19, 2021

Omega-Flex CAD Drawings

DESCRIPTION	EFFECTIVE	DWG	PDF
Omega-Flex, Over Plywood or OSB (Structural) Sheathing (OF-PLY)	March 15, 2021

We provide comprehensive technical shop drawings for ACM cladding projects. This includes engineering design criteria that is job specific and is tailored to the individual job conditions. Our team of project managers use the latest software available to create detail-oriented drawings from the information shown in the construction documents. Our shop drawings contain precise and accurate elevations with dimensions, sections and details to explain the installation and fabrication of the panels.

To ensure we have everything we need to provide you with accurate shop drawings, we have compiled some helpful resources. Documents are subject to change and new documents may be added at any point in time. Please be sure to check back for updates prior to starting a new project.

Shop Drawings Criteria Checklist

Effective Date: October 14, 2021

CAD Drawings Reference Matrix

Effective Date: July 22, 2024

TIP: When in the Word document, to view non-printing Editor’s Notes that provide guidance for editing, click on the “Show/Hide ¶” button in the tool panel at the top.

Field-Fabricated Panel Systems Specification (1-Piece, Tight-Fit and Clip & Caulk – Legacy Version)

Effective Date: April 29, 2022

Field-Fabricated Panel Systems Specification (1-Piece, Tight-Fit and Clip & Caulk – BDV)

Effective Date: April 29, 2022

Continuous Insulation Specification (Omega CI)

Effective Date: April 29, 2022

Rainscreen Wall System Specification (AdaptaClad® RS)

Effective Date: August 1, 2024

Shop-Fabricated Panel System Specification (Rout & Return)

Effective Date: April 29, 2022

Glazing Specification w/ Insulated Glazing Panels (Thermolite, Omega Foam-Ply, InfernoShield, Glaze-Lite)

Effective Date: February 6, 2024

ESL-1248 (NFPA 285 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for the following systems: 1-Piece, Tight-Fit Molding with BDV and Clip & Caulk with BDV over both Omega CI and gypsum sheathing.

ESL-1249 (AAMA 509 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for the following installation systems: 1-Piece, Tight-Fit Molding with BDV over Omega CI and Clip & Caulk with BDV over both Omega CI and gypsum sheathing.

ESL-1250 (ASTM E330 Standard)

Effective Date: February 2024

ESL-1251 (ASTM D1781 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for Omega-Lite ACM panels.

ESL-1252 (ASTM E331 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for the following installation systems: 1-Piece, Tight-Fit Molding with BDV and Clip & Caulk with BDV over Omega CI.

ESL-1253 (ASTM E84 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for Omega-Lite ACM panels.

ESL-1254 (ASTM E283 Standard)

Effective Date: February 2024

Laminators Incorporated maintains an ICC-ES Listing Report for the following installation systems: 1-Piece, Tight-Fit Molding with BDV and Clip & Caulk with BDV over Omega CI.

NFPA 285 with 1-Piece, Tight-Fit Molding System Over Omega CI®

Effective Date: August 1, 2019

Laminators Incorporated has met the conditions of acceptance of NFPA 285 for its 1-Piece, Tight-Fit Molding installation system with back-drained and ventilated subframing over Omega CI®.

NFPA 285 with 1-Piece, Tight-Fit Molding System Over Gypsum Sheathing

Effective Date: August 1, 2019

Laminators Incorporated has met the conditions of acceptance of NFPA 285 for its 1-Piece, Tight-Fit Molding installation system with back-drained and ventilated subframing over gypsum sheathing.

NFPA 285 with Clip & Caulk System Over Omega CI®

Effective Date: August 14, 2019

Laminators Incorporated has met the conditions of acceptance of NFPA 285 for its Clip & Caulk installation system with back-drained and ventilated subframing over Omega CI®.

NFPA 285 with Clip & Caulk System Over Gypsum Sheathing

Effective Date: August 1, 2019

Laminators Incorporated has met the conditions of acceptance of NFPA 285 for its Clip & Caulk installation system with back-drained and ventilated subframing over gypsum sheathing.

Miami-Dade NOA – Expires 08/2025

Effective Date: November 9, 2023

Laminators Incorporated has received a Notice of Acceptance (NOA) from Miami-Dade County Product Control Section for Omega-Lite ACM panels installed with a variety of the company’s installation systems under NOA #23-0911.07, expiring on August 20, 2025. Each applicable installation system met the requirements of the small and large missile impact testing using Laminators Omega-Lite ACM panel over a plywood substrate, and are approved for use in all HVHZs with a design wind pressure of +/- 120 pounds per square foot.

Florida Product Approval (FL17652-R3)

Effective Date: November 2023

Laminators’ Omega-Lite® ACM panels and applicable installation systems are approved for use in all Florida jurisdictions requiring FPA, including the High Velocity Hurricane Zone (HVHZ) with a wind load design pressure of +/- 120 pounds per square foot. The approval, FL# 17652-R3, includes 6mm Omega-Lite ACM panels installed in four of Laminators’ proprietary installation systems—1-Piece, Tight-Fit Molding, Clip and Caulk, Dry Seal, and Rout & Return.